Sharp MX-M850 Manual page 97

Storing, editing, and deleting text strings
Touch the [Text] key in the stamp selection screen.
1
See steps 1 to 4 of
Stamp
Text
2
Pre-Set
Recall
Stamp
Text
5 10
Store/Delete
No.01 AAA AAA
No.03 CCC CCC
No.05
No.07
No.09
To edit or delete a text string...
• When the key with the text string is touched, the following screen appears.
3
When the [Modify] key is touched, a text entry screen appears. The stored text string appears in the text entry
screen. Edit the text. To enter text, see "7. ENTERING TEXT" in the User's Guide. When you have finished entering
the text, touch the [OK] key. The text entry screen will close.
• When the [Delete] key is touched, the stored text is deleted.
• Text settings can also be configured in the Web pages. Click [Application Settings], [Copy settings] and then [Text
Settings (Stamp)] in the Web page menu.
"GENERAL PROCEDURE FOR USING
Cancel
Store/Delete Direct Entry
No.02 BBB BBB
No.04 DDD DDD
No.06
No.08
No.10
STAMP" (page 84).
Touch the [Store/Delete] key.
OK
First Page
All Pages
Store a text string, or edit/delete a stored
text string.
Back
• To store a text string, touch a key with no text stored.
1
A text entry screen will appear. A maximum of 50 characters
3
can be entered. To enter text, see "7. ENTERING TEXT" in
the User's Guide. When you have finished entering the text,
touch the [OK] key. The text entry screen will close.
• To edit or delete a text string, follow the instructions below.
A text has been already stored to this
location. Change the text?
Cancel Delete
97
Modify