Sharp MX-M850 Manual page 41

Paper Select
1. 8½x11
Plain
4
3. 11x17
4. 8½x14
Paper Select
Bypass Tray Type/Size Setting
Select the paper type.
Plain Pre-Printed
5
Pre-Punched Color
Heavy Paper 1 Heavy Paper 2
Heavy Paper 1: 28+ - 32 lbs.bond (106 - 128 g/m
Heavy Paper 2: 32+ lbs.bond, -65 lbs.cover (129 - 176 g/m
Heavy Paper 3: 48 lbs.bond, 110 lbs.index (177 - 205 g/m
Paper Select
Bypass Tray Type/Size Setting
Type
Recycled
Custom Size
Bypass Tray Type/Size Setting
Size Input
6
Large Capacity
Paper Tray
Tray
2. 8½x11 5. 11x17
Plain Plain
6. 11x17
Plain
Plain
7. 11x17
Plain
Plain
Recycled Letter Head
Thin Paper
Heavy Paper 3
2 )
2 )
2
)
Size
12x18(A3W),11x17,8½x14
Auto-Inch 8½x11,5½x8½R
7¼x10½R,9x12(A4W),A3,A4,B4
A3W(12x18),A3,B4,A4,A5R,B5
Auto-AB
B5R,A4W(9x12)11x17,8½x11
A4R
X17 Y11
Manual
17
X
(5 1/2~18 1/2)
inch
Y 11
(4~12 1/2)
inch
Check the paper type setting for the
OK
bypass tray. If you need to change the
Bypass Tray
setting, touch the paper type key.
8½x11
If you do not need to change the paper size and type that
Plain
appear under "Bypass Tray", go to step 7.
Select the type of paper used in the
bypass tray.
Cancel
Select the paper type that you will use.
1
The paper types that can be set vary depending on the bypass
2
tray installed. For paper types that can be set, see "PAPER
THAT CAN BE USED IN THE PERIPHERAL DEVICE TRAYS"
in the User's Guide and the specifications in the Safety Guide.
Set the paper size.
[Auto-Inch] key
OK
Touch this key when the loaded paper is an inch size (8-1/2" x
11", etc.). When the paper placed in the bypass tray is an inch
size, the paper size will be detected automatically and an
appropriate size set.
[Auto-AB] key
Touch this key when the loaded paper is an AB size (A4, etc.).
When the paper inserted in the bypass tray is an AB size, the
paper size will be detected automatically and an appropriate
size set.
OK
[Custom Size] key
OK
Touch this key when you know the size of the inserted paper
but it is not one of the inch or AB sizes.
When the [Custom Size] key is touched, the paper size entry
screen appears.
Touch the [X] key and enter the horizontal dimension of the
paper with the
enter the vertical dimension. When finished, touch the [OK]
key.
[Manual] key
Special standard sizes such as 320mm x 450mm,
225mm x 320mm, 318mm x 469mm, 234mm x 318mm,
312mm x 440mm, 220mm x 312mm, and 16K, 16KR, and 8K
(used in China) have been pre-stored. Touch the key of the
desired size.
(320mm x 450mm, 225mm x 320mm, 318mm x 469mm,
234mm x 318mm, 312mm x 440mm, and 220mm x 312mm
can only be used in the bypass tray when a large capacity trays
(MX-LCX5) is installed.)
41
keys, and then touch the [Y] key and