Sharp MX-M850 Manual page 61

(3)
Covers/Inserts
Front Cover Setting
Paper Tray
Bypass
Tray
8½x11
Plain
4
• If the cover will be copied on, label sheets and tab paper cannot be used.
• When the cover paper is fed from the inserter, the cover cannot be copied on.
To cancel cover settings...
Touch the [Cancel] key.
Special Modes
Covers/Inserts
Cover Setting
Front
5
Cover
Back
Cover
(2) (1) (4)
Cancel OK
Print on Front Cover
Yes No
(A)
(B) 1-Sided 2-Sided
OK
Cancel OK
Inserts Setting
Insertion
Type A
Insertion
Settings
Insertion
Type B
Tray Settings Page Layout
Select cover settings.
(1) If the cover sheet will be copied on, touch
the [Yes] key. Otherwise, touch the [No]
key.
If the [No] key is touched, only cover insertion will be
performed.
In this case, go to step (3).
(2) To copy on one side of the cover, touch the
[1-Sided] key. To copy on both sides of the
cover, touch the [2-Sided] key.
(3) Select paper settings for the cover.
(A) The currently selected paper tray for the cover is
displayed.
(B) The size and type of paper in the currently selected
tray is displayed.
To change the paper tray for the cover, touch the "Paper
Tray" key.
When the "Paper Tray" key is touched, a tray selection
screen appears. Select the paper tray for the cover in the
tray selection screen and touch the [OK] key.
Covers/Inserts
Front Cover
Inserter(Upper)
8½x11 1. 8½x11
Plain
Plain
3. 11x17
Inserter(Lower)
8½x11
4. 8½x14
Plain
(4) Touch the [OK] key.
If you wish to insert a back cover, touch
the [Back Cover] key.
The screen of step 4 appears. The procedures are the same as
for the front cover. Follow the procedures in step 4.
When following the procedures, substitute "Back Cover" for
"Front Cover".
61
Large Capacity
Paper Tray
Tray
2. 8½x11 5. 11x17
Plain Plain
6. 11x17
Plain
Plain
7. 11x17
Plain
Plain
OK
Bypass Tray
8½x11
Plain