Plustek MobileOffice D28 User Manual page 21

1. Suppose you select the LED2 tab for your next configuration, and select PDF
or OCR from the Categories drop-down menu. Select Readiris or
FineReader from the Properties drop-down menu.
Thanks to the program settings of these 2 functions have
analogies with each other; we'll describe their configuration steps
Information
together so that your reading would be easier.
2. The steps 2 to 4 please refer to the same steps of the section "Configure
Program Function"
3. Select a File Format, and then click Save to File to save the result, Open
after saving to review the result, or Send by e-mail to send out the result as
attachment.
Note: Only if you select PDF from the Categories menu and Readiris from the
Properties menu will the Send by e-mail option be enabled.
4. Select Save all pages to one file or Save each page as a separate file
according to your scanning needs. Enter the file name in File Name Prefix
section. Specify a destination file path by clicking the Browse button at the
right end of the Save option.
5. Click Advanced button to set more settings in the coming out window:
a. When Readiris is selected from the Properties drop-down menu, you can
select the proper settings in OCR Setting, Graphic or Language section.
17