Table of Contents
Advertisement
Sync
You can transfer frequency settings in either direction: from the bodypack to the rack unit, or from the rack unit to the body
pack.
Note: You can also choose to transfer other settings to the bodypack during a sync, such as lock or mode settings, using the Sync > RxSetup menu on the
rack transmitter.
Downloading settings from the bodypack
1.
Press the scanbutton on the bodypack.
2.
Align the IR windows and press the syncbutton from the rack transmitter LCD menu while the bodypack display is flash
ing "SYNC NOW...".
The level LEDs on the rack unit flash.
Sending settings to the bodypack
1.
Press the Sync button on the rack transmitter to access the sync menu.
2.
Align the IR windows.
When properly aligned the IR window on the transmitter illuminates.
3.
Press Sync to transfer settings.
The blue LED on the bodypack flashes.
Creating Custom Groups
This feature allows you to create your own groups of frequencies.
Menu: Radio > Custom
1.
Turn the Control wheel to select a custom group from the Group menu. (U1, U2, etc.)
2.
Push the Control wheel to move to the Channel parameter and turn it to select a channel (01, 02, 03, etc.)
3.
Push the Control wheel to move to the Freq parameter and select a frequency for that channel.
4.
Push the Next menu key to select a frequency for the next channel in that group.
5.
Select Load to find all other devices of the same model and band on the network. Then press enter to deploy the cus
tom group list to all these devices.
This overwrites all existing custom groups.
6.
Clear deletes all custom groups for all devices on the network.
MixMode
Some performers need to hear more of their own voice or instrument, while others want to hear more of the band. With Mix
Mode, the performer creates their own mix using the balance control (▼▲ buttons) on the bodypack.
To use MixMode, send a solo mix of the performer to the L/CH1 input on the transmitter, and send a band mix to the R/CH2 in
put.
Shure Incorporated
28/40
Advertisement
Table of Contents
