Table of Contents
Advertisement
Replacing the backup unit
5.6
Replacing the backup unit
The backup units are mounted on two frames. Two 1.6"-high or one 3.2"-high
backup devices can be mounted in one frame. If you want to replace a backup
unit, you must remove the frame, together with the installed devices, from the
housing.
Ê Open the housing of the storage subsystem(see section "Opening the
storage subsystem housing" on page 25).
Ê Remove all the cables from the installed backup devices in the frame
involved.
Figure 6: Opening the housing cover
Ê Release the mounting frame by pressing the locking bar (1) and move it in
the direction indicated (2).
Ê Remove the frame from the housing.
28
Troubleshooting
U41181-J-Z156-1-74
Advertisement
Table of Contents
