Storage Subsystem Cannot Be Switched On - Fujitsu PRIMERGY S10 Manual

Storage subsystem cannot be switched on

Figure 5: Removing the housing cover
Ê Lift up the housing cover at the back and remove it.
To close the housing, you follow the same procedure in reverse order.
5.2 Storage subsystem cannot be switched on
Ê Check the position of the "Local/Remote" switch and, if necessary, move the
switch to the "Remote" position (see also section "Switching the storage
subsystem on/off" on page 23).
Ê Check the connections to the CPU and the connection to the power supply.
Ê Boot the system again.
26
Troubleshooting
U41181-J-Z156-1-74