Electronic Control Operation - Rheem Gladiator Use & Care Manual

Programming the Electronic Control
14
Setting the Water Temperature
SERVICE NEEDED
CLEAR WiFi
ALARM SETUP
SET POINT (°F)
VACATION 110 120 130 140 150
UNLOCK/LOCK
(3 SEC)
Changing The Water Temperature
SERVICE NEEDED
CLEAR WiFi
ALARM SETUP
SET POINT (°F)
VACATION 110 120 130 140 150
UNLOCK/LOCK
(3 SEC)
115°F
SERVICE NEEDED
CLEAR
ALARM
SET POINT (°F)
VACATION 110 120 130 140 150
UNLOCK/LOCK
(3 SEC)
SERVICE NEEDED
CLEAR WiFi
ALARM SETUP
SET POINT (°F)
VACATION 110 120 130 140 150
UNLOCK/LOCK
(3 SEC)
or
VACATION 110
When power is applied, the
water heater will be in a
Disabled mode. This means that
the water heater is not heating
WiFi
SETUP
the water and only the power
LED is illuminated. Press the
RIGHT arrow until the desired
temperature is shown.
DANGER: Hotter water
increases the potential for Hot
Water SCALDS.
Reduce Water Temperature:
Press LEFT arrow until the
desired temperature is shown.
Increase Water Temperature:
Press RIGHT arrow until the
desired temperature is shown.
NOTE: A change in
temperature is in increments
of 5°F unless the Rheem
EcoNet® app is used.
SERVICE NEEDED
CLEAR WiFi
ALARM SETUP
SET POINT (°F)
120 130 140 150
UNLOCK/LOCK
(3 SEC)
125°F