Agilent Technologies 1142A User Manual page 4

1142A Probe Control and Power Module
Parts Supplied
Accessories Available
Instruments Covered by
Before connecting your Agilent probe to the 1142A, refer to the
probe's user's guide to learn how to perform measurements. This
manual contains information for use and service of the 1142A by
itself. It covers use of the 1142A as a power supply only and
service of the instrument in general. Use of the offset controls is
covered in the probe or oscilloscope manual.
The following items are supplied with the 1142A.
■
One power cord
■
One operating and service guide
A fan- out adapter is available to power two probes with one
supply.
■
Fan- out adapter, part number 01144- 61604
The 1142A's rear- panel serial number sticker is in the form:
Manual
0000A00000. The first four digits and letter are the serial prefix,
while the last five digits are the suffix. The prefix is the same for
all identical instruments, and it changes only when a change has
been made to the instrument. The suffix however, is assigned
sequentially and is different for each instrument. The contents of
this manual apply to instruments with the serial number prefixes
3050A.
4