Adjusting The Avaya Ix Cu360 Audio Volume; Sharing Content In Avaya Ix Cu360 Meetings - Avaya IX CU360 Using Manual

Operation
Procedure
1. Do one of the following:
• From the endpoint main menu, click Calendar.
• From the web interface, click Home > Calendar.
2. Click Join Now next to the meeting invitation.

Adjusting the Avaya IX CU360 audio volume

Procedure
1. Do one of the following:
• From the endpoint, click Configure > Calling.
• From the web interface, click Basic Settings > Call-Answer mode > General.
2. Drag the Volume slider to adjust the audio volume.
3. On the web interface, click Save.

Sharing content in Avaya IX CU360 meetings

About this task
Avaya IX CU360 supports only Avaya Screen Link to share content from your computer in
meetings.
Before you begin
Your computer:
• Must have the Avaya Equinox
• Must be connected to the same network as Avaya IX CU360. If your computer and Avaya IX
CU360 are connected to different networks, NAT or a firewall must not be configured
between the two networks.
Procedure
1. Connect your computer to Avaya IX CU360 using the IP address of the endpoint.
Avaya IX CU360 displays the IP address on the top bar.
2. Right-click Avaya Equinox
3. Enter the IP address of Avaya IX CU360.
If required, Avaya Equinox
4. (Optional) Enter PIN.
March 2019
®
client installed.
®
, and click Screen Link > Enter a Manual Location.
®
prompts your to enter PIN.
Using Avaya IX Collaboration Unit CU360
Comments on this document? infodev@avaya.com
42