Miele DA 2906 Operating And Installation Instructions page 43

 Confirm the signing off procedure by
pressing the run-on option control
515 on the cooker hood. All
indicators will go out.
Please bear in mind that disabling the
signal will also disable any
Con@ctivity 2.0 function and this will
have to be activated again.
To start the signing on procedure
 In Signing on/off mode press the ""
control on the cooker hood first and
then on the remote control.
The search for a signal will commence.
The remote control LED will flash
steadily.
After approx. 30 seconds the remote
control LED will flash on and off 4 times
at short intervals. The connection has
been established. The LED will go out
after a short while.
 Confirm signing on with the cooker
hood run-on option control 515. All
indicator lights will go out.
The remote control can now be used.
If you do not confirm your selection
within 4 minutes, activation will not take
place.
To cancel the signing on procedure
 If it is not possible to sign on the
procedure can be cancelled by
pressing the run-on option control
515 on the cooker hood and on the
remote control.
 The signing on procedure must then
be repeated. To do this the cooker
hood and the remote control must
first be signed off.
Signing on/off the remote control
43