Miele DA 2906 Operating And Installation Instructions page 30

Cleaning and care
Cleaning the panels and grease
filters in the dishwasher
 Place the panels and grease filters
upright or slightly inclined in the lower
basket. Ensure the spray arm is not
obstructed.
 Use a standard household
dishwasher detergent.
 Select a dishwasher programme with
a wash temperature between 50 °C
and 65 °C.
Depending on the detergent used,
cleaning the filters in a dishwasher
may cause the inside filter surfaces to
become discoloured. This will not
affect the functioning of the grease
filters in any way.
After cleaning
 After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
 When removing the panels and filters
for cleaning, also clean off any
residues of oil or fat from the now
accessible parts of the casing to
prevent the risk of these catching fire.
 Replace the grease filters, making
sure that the locking clips are facing
down towards the hob.
30
 If a grease filter is inadvertently
replaced upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
 To replace a panel, hold it firmly with
both hands, hook it over the retaining
bar (see detail in the illustration).
 Tilt the panel upwards at the front
and press it into the locking clip until
it clicks into position.