Sub Function - Plasma Purification - LG PQRCVSL0 Owners & Installation Manual

Owner's Instructions
• Direct/indirect wind is a additional function and it might not be available on all types of
indoor unit
36 New Wide Wired Remote Controller
The method to cancel direct/indirect wind
Please press the button.
1
2 The icon of direct/indirect wind
blinks on the display, and then, if
pressing button, direct/indirect
wind icon is removed and the
function is cancelled.
Pressing the button will exit the
3
settings mode. If is not pressed,
the remote controller will
automatically exit setup mode after 25
seconds with no input. If the set button is not
pressed, the changes will not take effect.
direct wind
indirect wind

Sub function - Plasma Purification

Only products with humidifying function can use this.
• Plasma purification is a additional function and it might not be available on all types of indoor unit
• Cleaning air function is possible only when product is running.
• If you want independent cleaning air drive, please set up cleaning air by pressing additional drive
button at ventilation drive.
Owner's Instructions
The method to setup cleaning air
1 Press the button until the
icons flashes.
2 Operate or cancel Plasma
Purification function by pressing
button.
( icon appears/disappears on
display part up
to selection )
Pressing the button will exit
3
the settings mode. If is not
pressed, the remote controller will
automatically exit setup mode after 25
seconds with no input. If the set button is
not pressed, the changes will not take
effect.
Owner's & Installation Manual 37