Standard Operation - Power Cooling; Standard Operation - Heating Mode; Standard Operation - Dehumidification Mode; Standard Operation - Fan Mode - LG PQRCVSL0 Owners & Installation Manual

Owner's Instructions

Standard Operation - Power Cooling

It makes the room cool using pleasant and fresh air quickly
What is Power Cooling?
• Power Cooling cools the room quickly by blowing 18°C(64°F) air at the most powerful fan speed
available.
C Partial product has no power air-cooling function.

Standard Operation - Heating Mode

It supplies warm wind to the indoor
• Heating drive only operates for the heating and cooling models.
•
Heating does not operate at cooling exclusive model.
30 New Wide Wired Remote Controller
1 Press button to trun on the
indoor unit.
Press button to select
2
cooling operation mode.
Press button until 'Po' is
3
displayed.
1 Press button to turn on the
indoor unit.
Press button to select
2
Heating mode.
(To check the indoor temperature,
press the room temperature button.)
Adjust the desired temperature
3
by pressing buttons.
When setting the desired
temperature lower than room
temperature, there is only
ventilation wind.

Standard Operation - Dehumidification Mode

It removes humidity while air-cooling slightly
•
In rainy season or high humidity climate, it is possible to operate simultaneously dehumidifier and
cooling mode to remove humidity effectively.
•
The menu item of wind powerfulness might not be partially selected according to the product.

Standard Operation - Fan Mode

It blows the air as it is in the indoor, not the cold wind.
•
Ventilation drive does not release cool wind but general fan
•
Because it releases the wind that has no temperature difference from the room, it functions to
circulate the inside air.
•
The menu item of wind powerfulness might not be partially selected according to the product.
Owner's Instructions
1 Press button to turn on the
indoor unit.
2 Press button to select
Dehumidification mode.
The temperature setting cannot be
adjusted during operation this mode.
3 Press the button to select
airflow rate SLO → LO → MED
→ HI → AUTO.
(The initial wind powerfulness of
humidity removal drive is 'weak'.)
Press button to turn on the
1
indoor unit.
Press button to select Fan
2
Mode.
3 Every time pressing button, you
can select wind flow in order of SLO
→ LO → MED → HI → SHI.
When running ventilation,
compressor of the air handling unit
does not work.
Owner's & Installation Manual 31