Table of Contents
Advertisement
How to use the Mode Selection Button
NANO PLASMA Purification Operation (Optional)
PLASMA Air Purifying Operation only
14 Wireless Remote Controller
Press the Start/Stop button.
1
The unit will respond with beep sound.
Open the door on the Remote
2
Controller. Press the PLASMA air
purifying operation ON/OFF button.
Operation will start when the button
is pressed and stop when the button
is pressed again.
Set the fan speed. You can select the fan speed in
3
four steps-low, medium, high or CHAOS.
Each time the button is pressed, the fan speed
mode is shifted.
❈ Air purifying operation (PLASMA) is
available in Heating or any other operations.
If you press the PLASMA button, NANO PLASMA
air purifying operates.
Each time the button (
speed mode is shifed.
) is pressed, the fan
Advertisement
Table of Contents
