Sunbeam Intuitive EM8910 Instruction Booklet page 16

Making an espresso with beans (continued)
Select espresso pour volume/size
Depending on your taste, select a short,
standard or a long espresso pour.
• For this press the 'espresso pour volume'
button until the desired cup symbol
is selected or the desired cup size is
indicated on the display. See figure 15.
The cup sizes are indicated as follows:
20mLs <<SMALL VOLUME>>
30mLs <<MEDIUM VOLUME>>
40mLs <<LARGE VOLUME>>
NOTE: The bottom line on the display shows
the coffee strength/quantity. The procedure
for changing this is explained in the following
section.
NOTE: The Sunbeam Intuitive Digital is set to
standard volumes. Instructions for changing
the set coffee volumes can be found in
section "Programming the espresso pour
volume: on page 24.
Selecting the strength/quantity of coffee
• Press the 'coffee strength/quantity' button
until the desired coffee quantity symbol is
selected or the desired coffee quantity is
indicated on the display. See figure 16.
The coffee strengths/quantities are indicated
as follows:
<<EXTRA-MILD>>
<<MILD>>
<<MID-STRENGTH>>
<<STRONG>>
<<EXTRA-STRONG>>
14
NOTE: The top line on the display shows the
espresso pour volume. The instructions for
selecting a different espresso pour volume
are in the previous section.
NOTE: To save having to select coffee
strength/quantity every time you switch on
the espresso machine, you can permanently
save the coffee strength/quantity in relation
to the espresso pour volume. Instructions
can be found in section "Programming the
espresso pour volume" on page 24.
Figure 15
Figure 16