Panasonic AW-UE4 Series Operating Instructions Manual page 68

Default Gateway
Input the unit's default gateway if the DHCP function is not going to be used.
The default is 192.168.0.1.
[Note]
Multiple IP addresses cannot be used for the default gateway even when the DHCP function is used.
For details on the DHCP server settings, consult your network administrator.
DNS
Whether the DNS server address is to be acquired automatically (Auto) or manually (Manual) is input here. The
default is Manual.
If [Manual] has been selected, the DNS settings must be established. If [Auto] is selected when the DHCP function
is going to be used, the DNS server address is acquired automatically.
For details, consult your system administrator.
Primary Server Address/Secondary Server Address
Input the IP address of the DNS server if the [Manual] setting has been selected for [DNS].
For details on the IP address of the DNS server, consult your system administrator.
[Note]
Multiple IP addresses cannot be used for the default gateway even when the DHCP function is used.
For details on the DHCP server settings, consult your network administrator.
 IPv6 network
Click [Set] button to save the configuration
IP Address(IPv6)
The IPv6 address must be entered manually.
Be sure to enter an address unique from other devices.
Default Gateway
Enter the default gateway for the unit's IPv6 network.
The default is blank.
Primary server address/Secondary server address
Enter the IPv6 address of the DNS server.
For details on the IPv6 address of the DNS server, consult your system administrator.
68