Siemens SIMEAS Q80 Operating Instruction page 99

Assembly, Commissioning, Parameterization E-23
Right click to LAN, than open properties
Settings in Windows for TCP/IP
If no IP-address is entered in the Properties page for the TCP/IP-connection ("Obtain IP-address automatically"), you
can determine the current IP-address using the Command Prompt. Note, however, that automatically obtained IP-
addresses are only valid until the next time the operating system is started! Start the Command Prompt via the
Windows Start menu by selecting Programs : Accessories: Command Prompt and then enter Ipconfig or ipconfig /all
for more detailed information:
Result of the command "ipconfig"
Power Quality Recorder SIMEAS Q80 7KG8080, Operating instruction
E50417-B1074-C419-A2, Release 09.02.2011