Assembly, Commissioning, Parameterization - Siemens SIMEAS Q80 Operating Instruction

9

Assembly, Commissioning, Parameterization

9.1 General Notes
Warning
When this device is in operation some of its parts will inevitably be at dangerous voltage levels.
Failure to comply with the operating instructions may lead to serious injury or property damage.
Therefore, be sure to observe all warning messages.
Warning
SIMEAS Q80 7KG8080 is a plug-in system designed for installation on a top-hat rail in a switching
cabinet. After installing the device and connecting its terminals, the switching cabinet in all events
be closed. This is the only way to provide adequate protection against inappropriate contact with
parts under voltage.
q The installation site must be free from shock and vibration. The range of ambient temperature permitted for
operation is limited (see
q Operation at temperatures beyond the permitted working temperature range can lead to incorrect
measurements and even failure of the device.
q The connection terminals are designed for cable diameters of up to 2,5 mm².
q The device may not be exposed to water condensation during operation. It must be positioned so that it is
not in direct sunlight or exposed to strong fluctuations of temperature.
Assembly, Commissioning, Parameterization
Technical data ).
67
Power Quality Recorder SIMEAS Q80 7KG8080, Operating instruction
E50417-B1074-C419-A2, Release 09.02.2011
E-17