Samsung CLP-550 Setup Manual page 97

4.8
P T
RINTING ASKS
Property
Make sure that Source is set to the
3 Source
corresponding paper tray.
Use the Manual source when printing to
special material. You have to load one sheet
at a time into the Multi-purpose Tray. See
page 3.9.
If the paper source is set to Auto Select,
the printer automatically picks up print
material in the following order: Multi-purpose
Tray, Tray1, Optional Tray2.
Make sure that Type is set to Plain Paper.
4 Type
If you load a different type of print material,
select the corresponding paper type. For
more information on print material, refer to
Chapter 3, "Using Print Materials."
If you use cotton paper, which weighs from
16lb to 24lb (60~90g/m
25% and Gilbert 100%, set the paper type to
Cotton paper for the best printing.
To use recycled paper, which weighs from
20lb to 24lb (75~90g/m
select Recycled Paper.
This property allows you to print the first
Different
5
page using a different paper type from the
Source for
rest of the document. You can select the
First Page
paper source for the first page.
For example, load thick stock for the first
page into the Multi-purpose Tray, and plain
paper into Tray1. Then, select Tray1 in the
Source option and MP Tray in the
Different Source for First Page option.
Scaling allows you to automatically or
6 Scaling
manually scale your printer job on a page.
You can choose from None, Scale Printing,
Fit to Page. For details, see page 5.4 and
page 5.5.
Description
2
), such as Gilbert
2
), or colored paper,