Printing On Transparencies - Samsung CLP-550 Setup Manual

3
When you print, configure the paper source to MP Tray, the
paper type to Labels and the size in the software
application. For details, see page 4.7.

Printing on Transparencies

• When you print a color document do not use transparencies
with an attached backing sheet. This may cause print quality
problems.
• Only use transparencies recommended for use in laser
printers.
• Ensure that transparencies do not have torn edges and are
not wrinkled or curled.
• Hold the transparencies by the edges and avoid touching the
print side. Oils from your fingers can cause print quality
problems.
• Be careful not to leave fingerprints on or scratch the print
side.
• You should use the following paper type:
A4: 003R96002, Letter: 3R3108
N : Before printing on
OTE
transparencies, make sure that
the output support is laid down.
U P M
SING RINT ATERIALS
3
3.17