Samsung CLP-550 Setup Manual page 65

2.14 U C
SING THE ONTROL
Item
Netware
Config Netware
IPX Frame Type
Reset Network
Default Set
Print Net CFG
P
ANEL
Explanation
Options: On*, Off
You can select whether or not you want
to use the Netware protocol.
If you select On , you can access the
Config Netware menu item.
Config Netware menu, you can
In the
specify the frame type parameter used
on your network.
Options: Yes, No*
You can set this item only when you set
Netware to On . This item lets you
select whether or not you set the frame
type parameter. Select
frame type.
Yes , the IPX Frame Type
If you select
option appears on the display.
Values: Auto*, EN_8022, EN_8023, EN_II,
EN_SNAP
You can select this item only when you
set Config Netware to Yes. This item
lets you select IPX Frame Type.
• Auto:You can set the frame type
automatically.
• EN_8022: Select this value to use the
IEEE 802.2 frame type.
• EN_8023:Select this value to use the
IEEE 802.3 frame type.
• EN_II :Select this value to use the
ETHERNET II frame type.
• EN_SNAP:Select this value to use the
SNAP frame type.
This item reboots the network interface
card.
This item performs a simple reset and
restores the factory default for the
network configuration.
This item prints a page showing the
network parameters you set.
Yes to select the