Advertisement
39412/SUBARU (P.01-09)
8/1/00 5:40 PM
K. Finishing the Installation
1. Reverse steps 1 through 10 in section B. Installation Preparation, to reassemble radio, radio
trim bezel, cup holder, ashtray, gear shift cover and parking brake trim.
2. Replace the lower dash panel below the steering column.
3. Place the window decals on the inside of the rear passenger windows at the lower-front edge of
each window. The bottom edge of the decal should be one (1) inch from the bottom of the win-
dow, and the front edge of the decal should be one (1) inch from the front of the window. Make
sure that the window is clean and the decal is square and straight before adhering to the win-
dow.
Installation is now complete.
Page 8
8
Advertisement
