Mode Table - Panasonic SA-HT535E Service Manual

SA-HT535E / SA-HT535EG

14.5. Mode Table 2

Following modes are available with combinations of the pressed buttons on the player and on the remote controller unit.
Item Operational Condition
and Key Function
Jitter display While the player is
stopped and no disc is
inserted,
hold
button on the player
and
button,
remote controller unit.
Error code While the player is
display stopped and no disc is
inserted,
hold
button on the player
and
button,
remote controller unit.
Measurement of While the player is
laser current stopped and no disc is
electricity inserted,
initialization value hold
button on the player
and the
the remote controller
unit.
Measurement of While the player is
DVD laser current stopped and no disc is
electricity inserted,
hold
button on the player
and
button on the remote
controller unit.
ADSC internal While the player is
RAM display stopped and no disc is
inserted,
hold
button on the player
and the number button
"1" or "2" on the remote
controller unit.
Measurement of While the player is
CD laser current stopped and no disc is
electricity inserted,
hold
button on the player
and the number button
"3" on
controller unit.
Jitter display
Measures
press and Measurement
down the second. Read error counter starts at 0
at the mode setting, and increased by
the number one as data read fails at target block. A
"5" on the small defect is allowed to correct by
retry. Any possibility is counted as one
increment. Repetitive errors after retry
increase by two levels or more.
Error code display
Displays the latest error code stored in
press and EEPROM.
down the
the number
"0" on the
Measurement
electricity initialization value
press and Memorizes each initialization value of
down the DVD and CD in EEPROM.
button on
Measurement of DVD laser current
electricity
press and Measures DVD laser current electricity
down the and displays the result together with
the initialization
the DISPLAY EEPROM. After measurement, DVD
laser is lit till the power is turned off (or
goes off when the primary power is
turned off).
ADSC internal RAM display
Reads and displays the RAM value
press and inside ADSC. The address is renewed
down the when the CLEAR key is pressed so
that the values at eleven points appear.
Measurement of CD laser current
electricity
press and Measures CD laser current electricity
down the and displays the result together with
the initialization
EEPROM. After measurement, CD
the remote laser is lit till the power is turned off (or
goes off when the primary power is
turned off).
Details
*1
J xxx
and displays jitter.
*1
is repeated every : Jitter display mode
*2
: Jitter measurement value
*3
: Read error counter
*4
: Focus driving value
Values are shown to one decimal place
in the decimal digit.Focus driving value is
displayed in the hexadecimal digit.
DVDnn_F---
*nn: Error history
*--: Error number
*1
of laser current DO
*1
: Laser current electricity measurement
mode
*2
: DVD current electricity value
*3
: CD current electricity value
Values are shown in the decimal digit.
The above example indicates that the
current electricity initialization value is
34mA at DVD laser and 28mA at CD
laser when laser is turned on.
*1
DD
*1
: DVD laser current electricity
measurement mode
*2
value stored in : Current electricity initialization value
stored in EEPROM
*3
: Present value of current electricity
Values are shown in the decimal digit.
The above example indicates that the
current electricity initialization value is
34mA and its present value is 32mA.
*1
A _0FA
*1
:ADSC internal RAM display mode
*2
: Address
*3
: RAM value at displayed address
Values are shown in the hexadecimal
digit. The above example indicates that
ADSC value at the address, 0FAh is
6901h.
*1
DC
*1
: CD laser current electricity
measurement mode
*2
value stored in : Current electricity initialization value
stored in EEPROM
*3
: Present value of current electricity
Values are shown in the decimal digit.
The above example indicates the current
electricity initialization value is 28mA and
its present value is 26mA when laser is
turned on.
26
Display
*2 *3 *4
_yyy _zz
*2 *3
_034 _028
*2 *3
_034 _032
*2 *3
_6901
*2 *3
_028 _026
To Exit Mode
Press the STOP or
OPEN button.
Automatically exits
the mode after five
seconds.
Automatically exits
the mode after five
seconds.
Automatically exits
the mode after five
seconds.
Press the STOP or
OPEN button.
Automatically exits
the mode after five
seconds.