Siemens SIMATIC LOGO! CMR2020 Operating Instructions Manual page 108

Operation
7.2 Monitoring
Adding a new action
1. In the lower part of the page, click the "Add" button.
2. An input box and three drop-down lists are then available for the configuration:
Name
– Freely selectable symbolic name for this action.
Destination
– Select the destination of your action from the drop-down list. Destinations can be the
Recipient group
You can only select recipient groups and not individual users or phone numbers.
– If you select "Send SMS message" or "Send PI SMS message" as the destination, you
Message text
– If you select "Send SMS message" as the destination, the message texts you have
3. Depending on the selection you have made in "Destination", further drop-down lists will
become available with which you can complete your action.
4. If you click the "Apply" button, the entries you have made are adopted.
Result: Your action is adopted and displayed in the list.
Deleting an action
Note
Elements that are being used cannot be deleted
You can only delete an element (signal, text, user, recipient group, event, action) if the
element is unused.
If the element is used, e.g. a user in a recipient group or a signal in an event, you cannot
delete the element.
1. In the list, select the row with the action you want to delete.
2. Click the "Delete" button.
A prompt for confirmation is displayed.
3. If you confirm this, the action is deleted and removed from the list.
108
CMR, the BM, the SMS or the process image send function.
If you select the CMR, you can use the two outputs of the CMR as the target element
of an action: For example open an output, close or change an output.
If you select the BM as the destination of your action you can change status of the BM
or forward the GPS position data to the BM.
can choose from the recipient groups you have configured.
created will be displayed and you can choose from them.
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01