Split system (Single phase and 3-phase type)
6.1.10
EEV COIL removal
MAIN
Remove the EEV coil by hand.
6.1.11
PRESSURE SENSOR removal
Remove the PRESSURE SENSOR
with wrench.
Note the tightening at the installation.
Tightening torque is 12+-1.5N.m.
Maintenance Document 1544-1
INJECTION
Remove the EEV coil by hand.
>
Warning !
Wear gloves to prevent the frostbite, because a
small amount of refrigerant leaks during work.
<
99