Split system (Single phase and 3-phase type)
6.1.5 FAN MOTOR removal
Remove the 4 mounting screws.
Cut the binder. (2 places)
6.1.6 VALVE COVER removal
Hook (4 places)
Remove the mounting screws
96
Remove the FAN GUARD by
sliding upward.
Loose the clamp. (2 places) and
remove the lead wires.
screw
Remove the VALVE COVER.
Remove the Hex Socket Screw. And
remove the PROPELLER FAN.
Note at the installation.
Insert propeller Fan and Moter shalf
reference D cutting position.
And the tightening torque at the
installation.
Tightening torque is from 10 to 15 N.M.
Remove the 4 mounting screws.
Remove the FAN MOTOR.
Maintenance Document 1544-1