3.2
Housing installation
6
3
2
Building Technologies
Fire Safety & Security Products
318
min. 50 mm
405
Procedure:
1. Open housing (4) with hexagon wrench No. 3 (included in the housing set).
2. Remove converter B2F020 (6) (put it back afterwards)
3. Determine place of installation.
4. Mark and drill mounting holes (2).
5. Break out the necessary cable entries (3).
6. Screw housing to the wall (5) (screws, dowels, washers and spring washers to
be provided by the installer)
1
8 mm
5
Installation
min. 1m
1.7 m
4
007828_b_en_--
09.2008
11