Certification - Siemens SIMATIC NET CP 5613 A2 Operating Instructions Manual

Certification

Note
The specified approvals apply only when the corresponding mark is printed on the
communications processor.
Electromagnetic compatibility - EMC directive
The communications processor meets the requirements of the EC Directive:2004/108/EEC
(EMC directive).
The communications processor is designed for use in the following areas:
Residential areas, business and commercial
operations, and small businesses
Industrial environment
EC declaration of conformity
You will find the EC declaration of conformity for this communications processor on the
Product Support pages under the following entry ID:
63367995 (http://support.automation.siemens.com/WW/view/en/63367995)
Machinery directive
This communications processor is not a machine in the sense of the EC directive
2006/42/EEC (Machinery Directive). There is therefore no declaration of conformity relating
to this EC Directive for the communications processor.
If the communications processor is part of the equipment of a machine, it must be included in
the procedure for obtaining the declaration of conformity by the manufacturer of the machine.
C-TICK approval
The communications processor meets the requirements of the Australian AS/NZS 3548
standard.
CP 5613 A2 / CP 5614 A2
Operating Instructions, 12/2012, C79000-G8976-C301-02
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Area of application Requirements
Emission
EN 61000-6-3 EN 61000-6-1
EN 61000-6-4 EN 61000-6-2
A
Immunity
29