Battery Removal - Fluke ProSim 4 Getting Started

Battery Removal

The battery pack is easy to remove and replace. To
remove the battery pack:
1. Push down on the battery pack latch as shown in
Figure 5.
Push
Down
2. Pull the battery pack from the Product.
To put the battery pack into the Product, align the battery
pack with the guides on the Product and push it into the
Product until the catch locks.
The ProSim 4 battery is not compatible with the
ProSim 6/8.
Figure 5. Battery Removal
Vital Signs Simulator
Pull Out
Maintenance
gne023.eps
15