TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55
Users Manual
Number
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Charge and Insert Battery
Charge the batteries for 3 hours before use. Use only the rechargeable batteries
supplied. A battery is fully charged when the green LED light on the charger
remains solid.
Insert the charged battery into the slot on the bottom of the camera as shown in
Figure 1-2.
You may use the auxiliary AC power supply to connect the camera to
a working AC outlet until at least one of the batteries is charged.
info@Fluke-Direct.com
1-6
Table 1-2. Standard Accessories
Portable Infrared Camera with Lens Cap
Camera Carrying Case
LCD Cleaning Cloth
AC adapters (2) or equivalent
Auxiliary AC Power Supply (TiR2, TiR4, Ti45 and Ti55 only)
or equivalent
AC Patch Cord or equivalent
Neck Strap
Video Cable
AC Power Supply
Battery Charger
Compact Flash Memory Card
Two Rechargeable Batteries
Multifunction Memory Card Reader with USB Adapter
Getting Started Guide
SmartView® Software CD (includes SmartView Users Manual)
FlexCam Documentation CD (Users Manuals)
Fluke-Direct
Description
Note
.com
1.888.475.5235