System Overview - Siemens SINUMERIK 828D PPU Series Manual

System overview

Features
SINUMERIK 828D is a tailor-made CNC solution for milling and turning machines in the
medium performance range.
SINUMERIK 828D is a panel-based CNC (panel processing unit). A CNC, PLC, operator
panel and axis control for 6 drives (standard) are combined in one unit. This design provides
a high degree of robustness by eliminating the need for hardware interfaces between the
CNC electronics board and the operator panel. In order to guarantee that operation is as
low-maintenance as possible, there are no wearing parts such as fans or back-up batteries.
● CNC operator panel with tailor-made system software versions for turning and milling
● 2 operator panel versions for horizontal and vertical operator panel housings.
● Integrated full QWERTY CNC keyboard with mechanical short-stroke keys.
● USB, CompactFlash card and Ethernet interface on operator panel front.
● Additional Ethernet interface on rear of CNC for fixed factory network.
● PLC I/O Interface based on PROFINET for the connection of PLC I/O devices and a
● PP 72/48D PN and PP 72/48D 2/2A PN as PLC I/O module.
● 2 connectable handwheels.
● Optional GSM modem connection possible.
● Versions: PPU 260/261, PPU 280/281 and PPU 240/241 in the versions BASIC T and
● Up to 6 axes/spindles for milling applications and up to 8 axes/spindles for turning
● 1 machining channel/mode group.
● Integrated PLC based on the SIMATIC S7-200 command set with Ladder Steps
PPU
Manual, 11/2010, 6FC5397-2DP10-1BA0
technologies.
machine control panel.
BASIC M
applications.
programming
2
15