April 2019
4
Startup
Procedure
1. Using the infrared remote control (IRC), press PROG, NEXT, NEXT,
and ENTER in this order.
2. Select the measurement type and unit of measurement.
3. Use the arrow keys to toggle between Celsius and Fahrenheit.
4. Press ENTER and then RESET.
5. Press PROG, NEXT, and ENTER in this order.
6. Use the arrow keys to toggle T AUTO between ON or OFF.
This determines whether the transmitter uses the process
temperature (ON) or a manual temperature (OFF).
7. Press ENTER.
8. If you select OFF,enter the manual temperature desired using the
arrow keys.
9. Press ENTER.
Quick Start Guide
Quick Start Guide
29