Quick Start Guide
3.2
Infrared remote control (IRC)
Use the IRC to read diagnostics messages, calibrate connected sensors, and
program the transmitter. Hold the IRC within 6 ft. (1.8 m) of the transmitter
and less than 15 degrees from the horizontal of the display window.
Figure 3-3: Infrared Remote Control (IRC) Functions
1. RESET
•
End current
operation and return
to the main display.
•
Changes are not
saved.
•
Does not return the
transmitter to factory
default settings.
2. Editing (arrow) keys
•
Change values of a
flashing display.
•
Left and right arrows
move the cursor by
one digit.
•
Up and down arrows
increase or decrease
the values and
navigate through the
display options.
3. CAL
•
Access to Calibration
menu.
4. PROG
•
Access to Program
menu.
5. DIAG
•
Access to
diagnostics.
14
April 2019
6. HOLD
•
Access to turn hold
readings on or off.
7. ENTER
•
Advance to the next
prompt.
•
Store selected item.
•
Store value in
memory.
8. NEXT
•
Advance to the next
sub-menu.
9. EXIT
•
End current
operation.
•
Return to the first
prompt in the
present sub-menu.
•
Changes are not
saved.
Emerson.com/Rosemount