Advertisement
April 2019
Certification conditions
Certification standards
1.3.3
CSA
Explosion proof
certification
Certification conditions
Intrinsic safety
certification
Certification conditions
Non incendive
certification
Certification conditions
Certification standards
1.3.4
FM
Explosion proof
certification
Certification conditions
Quick Start Guide
The Rosemount 5081 enclosure may be made of
aluminum alloy and given a protective polyurethane
paint finish; however, care should be taken to prevent it
from impact or abrasion if located in a Zone 0
environment.
EN60079-0:2012+A11:2013, EN60079-11:2012
Class I, Division 1, Groups B, C, D
Class II, Division 1, Groups E, F, G
Class III
T6 T
max. 70 °C
amb
4X enclosure type
Seal required at each conduit entry
Class I, Division 1, Groups B, C, D
Class II, Division 1, Groups E, F, G
Class III
T4 T
max. 70 °C
amb
4X enclosure type
For Intrinisically Safe installation, see drawings
1400674 or 1400675.
Class I, Division 2, Groups B, C, D
Class II, Division 2, Groups E, F, G
Class III
T4 T
max. 70 °C
amb
4X enclosure type
For Non-Incendive Field Wiring installation, see
drawings 1400674 or 1400675
CSA standards: 22.2 No. 0-M1987, 22.2 No. 142-
M1987, 22.2 No. 157-921, 22.2 No. 213-M1987
Class I, Division 1, Groups B, C, D
T6 T
max. 70 °C
amb
4X enclosure type
Install per control drawing 1400678 or 1400679.
Quick Start Guide
7
Advertisement
