Table of Contents
Advertisement
Table 17: KNX Accessories Ordering Information
Product Code Number
1
SIS-KNXNIXL-0E
1
SIS-KNXNRXL-0E
1
European market: order this accessory in AOMS from the Essen Distribution Center.
Modbus Integrations require one or more vendor Modbus definition (VMD) tables for specific third-party equipment.
You can purchase tables from your regional System Integration Services (SIS) office, or you can create the tables
with the VMD Generator Express (VGE) tool. To obtain a license, attend the training listed in the following table.
Table 18: VGE Training Tool Ordering Information
Product Code Number
C-10077
PTK-CONT-26
Technical Specifications
Table 19: NIE39 and NIE49
Power Requirement
Power Consumption
Ambient Operating Conditions
Ambient Storage Conditions
Data Protection Battery
Processor
Memory
Operating System
Network and Serial Interfaces
Housing
Mounting
NIE39/NIE49 Installation Instructions
Description
KNX IP interface module to connect KNX line through Ethernet to an NIEx9
KNX IP router to connect KNX line through Ethernet to an NIEx9, including line or area
coupler functionality
Description
VGE Tool Software Training (North America)
The VGE tool is required to generate custom Modbus mapping tables for the NIE.
VGE Tool Software Software Training (Europe and Asia)
The VGE tool is required to generate custom Modbus mapping tables for the NIE.
Dedicated nominal 24 VAC, Class 2 power supply (North America), SELV power supply
(Europe), at 50/60 Hz (20 VAC minimum to 30 VAC maximum)
25 VA maximum
0 to 50°C (32 to 122°F); 10–90% RH, 30°C (86°F) maximum dew point
-40 to 70°C (-40 to 158°F); 5–95% RH, 30°C (86°F) maximum dew point
Supports data protection on power failure. Rechargeable NiMH battery: 3.6 VDC 500 mAh,
with a typical life of 5 to 7 years at 21°C (70°F); Product Code Number: MS-BAT1020-0
192 MHz Renesas® SH4 7760 RISC processor
128 MB flash nonvolatile memory for operating system, configuration data, and operations
data storage and backup and 128 MB synchronous dynamic random access memory
(SDRAM) for operations data dynamic memory
Microsoft® Windows® CE embedded
One Ethernet port; 10/100 Mbps; 8-pin RJ-45 connector
One optically isolated RS-485 port; 9600, 19.2k, 38.4k, or 76.8k baud (depending on
protocol); with a pluggable and keyed 4-position terminal block (FC Bus available on
NIE391x-1 and NIE491x-1 models only.)
One L
W
port; FTT10 78 Kbps; pluggable, keyed 3-position terminal block (L
ON
ORKS
port available on NIE392x-x and NIE492x models only)
Two RS-232-C serial ports with standard 9-pin sub-D connector that support standard baud
rates
One USB serial port with standard USB connector that supports an optional, user-supplied
external modem
Plastic housing material: ABS + polycarbonate
UL94-5VB Protection: IP20 (IEC 60529)
On flat surface with screws on three mounting clips or a single 35 mm DIN rail
W
ON
ORKS
20
Advertisement
Table of Contents
