Safe Shutdown - Planet IPM-4220 User Manual

Parameters
Name
Power on delay
Power off delay
Sync Port
Default
4.2.2

Safe Shutdown

This page is for setting the computer device name connected to the power outlet. When users want to
power off the outlet, firstly the computer connected should be shut down, and then switch off the power
within the preset delay time.
Parameters
MAC
Delay Delivery
Computer Name
Description of each power outlet.
Set the number of seconds that device waits after a command is
issued before applying power to an outlet.
Set the number of seconds that device waits after a command is
issued before removing power from an outlet.
To be displayed after concatenation is enabled is the setting of the
power outlet to be linked with the power outlet of the concatenated
device.
You may set preset switch status when local power is lost and comes
back again. The statuses from the drop-down list are 1.ON, 2.OFF, 3
Last statuses before power was lost.
Please enter the Computer MAC address; the main function is
computer remote Wake-up On LAN (WOL).
After power delay delivery time is enabled, the WOL command is
delivered to computer.
Prior to the execution of safe shutdown, an application should be
installed on the computer. After successful installation and
registration, select the computer to be shut down from the drop-down
list and then it will be displayed on the web page.
40
- -
IP-based 4/8-port Switched Power Manager Power
Description
Description
IPM-4220 / IPM-8220