Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Planet IKVM-8010
Summary of Contents for Planet IKVM-8010
- Page 1 8/16-Port IP KVM Switch IKVM-8010 / IKVM-16010 Quick Installation Guide...
-
Page 2: Table Of Contents
Table Of Contents Chapter 1 Introduction ..................3 1.1 Features ....................3 1.2 Package Contents ................. 4 1.3 Technical Specifications ................. 4 Chapter 2 Installation ..................5 2.1 System Requirements ................5 2.2 Hardware Installation Procedures ............6 2.3 Initial Configuration ................7 Further Configuration .................. -
Page 3: Chapter 1 Introduction
110MHz, therefore, the remote VGA resolution can up to 1600 x 1200 with a frame rate of 60 Hz. User can connect up to 8 / 16 PCs to the IKVM-8010 / IKVM-16010. The IKVM-8010 / IKVM-16010 can fully control the connected PCs of any platform through any at-hand browser or just work as a normal 8/16-Port KVM Switch in local site. -
Page 4: Package Contents
High Video Quality – Resolution Up To 1920 x 1440 (local side), 1600 x 1200 (remote side) No Software Required - easy PC selection via On Screen Display (OSD) menu, Push Buttons, Hot Keys 1.2 Package Contents Footpads x 4 CD-ROM x 1 Power Adapter x 1 IP KVM Switch Unit x 1... -
Page 5: Chapter 2 Installation
Local Console: One USB Keyboard, one USB Mouse and one Monitor Remote Console: Computers installed with TCP/IP For an insecure connection to the IKVM-8010 / IKVM-16010, the following browsers can be used: Microsoft Internet Explorer version 5.0 or higher on Windows 98, ME, 2000, XP... -
Page 6: Hardware Installation Procedures
4. Connect a mouse to the green USB connector in LOCAL CONSOLE side. 5. Use 3-to-1 cable to connect IKVM-8010 / IKVM-16010 and PCs. On one end, it has just one HDDB 15-pin male connector. Please plug it into the computer port on the rear of IKVM-8010 / IKVM-16010. -
Page 7: Initial Configuration
3. Once the utility is executed, it will search for available IKVM-8010 / IKVM-16010 automatically. 4. On the upper left corner, the MAC address of the IKVM-8010 / IKVM-16010 is displayed. To manually detect the MAC address again, press the button “Refresh... -
Page 8: Further Configuration
Devices”. The displayed MAC address is the same MAC address printed on the sticker Placed on the bottom of the IKVM-8010 / IKVM-16010. If the IKVM-8010 / IKVM-16010 are connected via USB, it is classified as an USB device and an appropriate drive letter is chosen for this device.