Photo - Samsung ML-6060 Technical Instructions

ML-6060/1650 Technical Instructions

Photo 20

Photo 21
Photo 22
Photo 23
Photo 24
Step 16
Lift up on the waste hopper and remove
the hopper from the cartridge.
(See Photo 20)
Step 17
If the drum axle has already been removed
lift out the drum. If the drum axle cannot
be removed from the drum slide the axle
out as far as possible from the drive gear
end. (See Photo 21)
Lift the small gear end of the drum up out
of the cartridge and slide the drum axle
out from the end of the cartridge.
(See Photo 22)
NOTE: If the drum being used is damaged
and the axle cannot be removed from the
drum by simply pulling the axle out,
remove the small gear from the end of the
drum. Install the drum axle into the new
drum and glue the gear into place.
Step 18
Using a Philips screwdriver, remove the
two screws holding the PCR to the waste
hopper. (See Photo 23) Remove the PCR.
Clean the PCR using a dry lint free cloth.
Step 19
Remove the two screws holding the wiper
blade. (See Photo 24) Clean the wiper
blade with dry compressed air.
Notes
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com

5