Photo - Samsung ML-6060 Technical Instructions

ML-6060/1650 Technical Instructions

Photo 9

Photo 10
Photo 11
Photo 12
Photo 13
Step 8
Side the cartridge end cap from the side
of the cartridge. (See Photo 9)
Step 9
Pull the metal gear housing plate from the
side of the cartridge. (See Photo 10)
NOTE: Two gears may stay attached to
the gear housing end plate.
Step 10
A white bearing may be found on the shaft
of the toner hopper supply roller. Slide the
bearing from the supply roller shaft.
(See Photo 11)
If it the bearing is not on the shaft check
the cartridge end cap.
(See Photo 12)
It is important that this bearing be present
during the reassembly of the cartridge.
Step 11
Remove the three gears from the side of
the cartridge. ( ( See Photo 13)
Notes
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
3