Table of Contents
Advertisement
Installing/Mounting
4.4 Installation precautions
4.4
Installation precautions
The following precautions should be observed when handling the scale.
● Do not pry on the idler, its mountings, or the cells directly.
● Do not stand or lean on the scale.
● Avoid shock from blows of a hammer when trying to position the scale during installation.
● Do not lift the scale by the top load cell mounting brackets.
Arc welding
Use extreme caution when arc welding in the area of the belt scale. Ensure that no
welding current can flow through the belt scale. Welding currents passing through the
scale can functionally damage the load cells.
16
CAUTION
Operating Instructions, 09/2016, A5E38964753_AB
Milltronics WD600
Advertisement
Table of Contents
