NEC Express5800 Series Maintenance Manual page 112

Chapter 2 Useful Features
Capacity
Indicates capacity of the Physical Device.
State
Indicates status of the Physical Device.
Status Indication of Physical Device
UG
Online
Offline
Failed/Frn-Bad
Foreign
Rebuild
Hotspare
DG
When the related Physical Device is included in the Drive Group, the Drive Group No. is displayed. When the
Physical Device is not included in the Drive Group, the number is not displayed.
Vendor
The manufacturer of the Physical Device is displayed.
(b) Detail screen
The information on the selected Physical Device is displayed. To go to the next page, move a cursor to the
Physical Device, press the <Tab> key, move the cursor to <GoToPage:X>, and then press the <Enter> key.
112
Abbreviation of Unconfigured Good. The Physical Device connected with the
controller is not in use. In the "VD Mgmt", this is displayed as "Ready".
The Physical Device is installed to the Drive Group.
Indicates that it is in normal state.
The Physical Device is installed to the Drive Group.
Indicates that it is in offline state.
The related Physical Device is dead.
Indicates that the other RAID configuration information (Foreign Config) is
saved.
The related Physical Device is being rebuilt.
This is displayed in the Physical Device specified in the Hot Spare disk.
Tips
Change of the Physical Device settings is not allowed. Only the display of the
information is allowed.
Important
Error shown in PAGE-2 "S.M.A.R.T. state" means that a failure in the related
Physical Device is expected as a result of the Physical Device self-diagnosis.
The failure may not occur soon. However, early replacement of the related
disk is recommended.
Express5800/B120f Maintenance Guide
4. RAID System Configuration