NEC Express5800 Series Maintenance Manual page 104

Chapter 2 Useful Features
Operation for Virtual Drive
Init.
CC
Back Init.
Recon.
(b)-4 Physical Device (Drives)
Shows Physical Device (Drives) state and implemented slot number.
For the status of the Physical Device, refer to [Status (State) of Physical Device].
State Indication of Physical Device
Unconfigured Good
Online
Offline
Missing
Failed
Rebuild
(c) Operation for RAID system
Placing a cursor in the red frame shown in the figure below and pressing the <F2> key allows you to perform
operation for the Physical Device of this RAID controller, drive group, and Virtual Drive.
(c)-1
(c)-2
(c)-3
(c)-4
104
Initializing the logical drive
Checking consistency of the logical drive
Background Initializing the logical drive
Reconstructuring the logical drive
The Physical Device connected with the controller is not in use.
Indicates that the Physical Device in configuration is in normal state.
Indicates that the Physical Device in configuration is in offline state. The
indication is red.
Indicates that the Physical Device in configuration is missing. If Physical
Device is connected, it may be failed.
The Physical Device is faulty.
The indication is red.
The Physical Device is being rebuilt.
Express5800/B120f Maintenance Guide
4. RAID System Configuration