Switch 4200 Family
— Rear View Detail
Power Socket
Power Socket
Redundant Power
System Socket
Console Port
Figure 4 Switch 4200 Family — rear view
The Switch automatically adjusts its power setting to any supply voltage
in the range 90-240 VAC.
To protect against internal power supply failure, you can use this socket
to connect a Switch 4200 to a SuperStack Advanced Redundant Power
System (RPS). See
"Connecting a Redundant Power System"
The console port allows you to connect a terminal and perform remote or
local out-of-band management. The console port uses a standard null
modem cable and is set to auto-baud, 8 data bits, no parity and 1 stop
bit.
About the Switch 4200 Series
Supply Data Warning Label
Redundant Power System Socket
17
Console
(max) 19200,8,1,N
Console Port
on
page
25.