Allow List - Panasonic KX-TGA760 Operating Instructions Manual

Adding call blocked
numbers from the caller
list
1
MCALLER LISTN
2
MbN: Select the desired entry
to be blocked. a MOKN
3
MbN: "Save Block list"
a MOKN
4
MbN: "Yes" a MOKN a
MEXITN
Setting the block mode
The unit can block calls by setting
the following block mode
beforehand.
– "Unknown" : You can block
calls when no phone number is
provided, such as private
callers or out of area calls.
– "International" : You can
block the international call.
– "00 prefix" : You can block
calls whose phone number
starts with "00".
The default setting for each mode
is "Off".
1
MMENUN
2
MbN: "Block mode" a MOKN
3
MbN: Select the desired block
mode shown above. a MOKN
4
MbN: Select the desired
setting. a MOKN a MEXITN
For assistance, please visit http://shop.panasonic.com/support
Basic Operation
Viewing/erasing call
block numbers
1
MBLOCK LISTN
2
MbN: Select the desired entry.
R The number of times the
entry was blocked is also
displayed.
R After viewing, press MEXITN
to exit.
3
To erase a number:
MERASEN a MEXITN
Erasing all call block
numbers
1
MBLOCK LISTN
2
MMENUN a MbN: "Erase
all" a MOKN
3
MbN: "Yes" a MOKN a
MEXITN

Allow list

You can allow specific callers to
pass through by adding the
caller's phone number to the allow
list. You can store up to 100
phone numbers (14 digits max.). If
the phone number stored in the
allow list matches the incoming
Caller ID, the ringer indicator
flashes green and your external
phone rings.
13