Preset Menu - Stanton C.503 User Manual

5. Exit the program edit mode [PROGRAM] by pressing and holding the SHIFT button then pressing the CNT/SGL but-
ton.
Edit program
1. Enter the program edit mode [PROGRAM] by pressing and holding the SHIFT button then pressing the CNT/SGL but-
ton.
2. Program number is shown in the parameter display. Select the desired program number with the Jog wheel.
3. Select desired track with track skip buttons.
4. Repeat 2-3.
5. Exit the program edit mode [PROGRAM] by pressing and holding the SHIFT button then pressing the CNT/SGL but-
ton.
Insert program
1. Enter the program edit mode [PROGRAM] by pressing and holding the SHIFT button then pressing the CNT/SGL but-
ton.
2. Program number is shown in the parameter display. Select desired program number where you want to insert the pro-
gram with the Jog wheel.
3. Press MEMORY/CUE (INS) button.
4. Select desired track with track skip buttons.
5. Repeat 2-4.
6. Exit the program edit mode [PROGRAM] by pressing and holding the SHIFT button then pressing the CNT/SGL but-
ton.
Delete program
1. Enter the program edit mode [PROGRAM] by pressing and holding the SHIFT button then pressing the CNT/SGL but-
ton.
2. Program number is shown in the parameter display. Select desired program number that you want to delete with the
Jog wheel.
3. Press LOOP (DEL) button.
4. Repeat 2-3.
5. Exit the program edit mode [PROGRAM] by pressing and holding the SHIFT button then pressing the CNT/SGL but-
ton.

3-9. Preset Menu

1. Pressing and holding the SHIFT button then using the Jog wheel selects the preset menu.
2. Select the desired preset menu then press the TIME/ENTER button, the LCD shows the preset menu and its param-
eter.
3. Set the desired parameter with the Jog wheel.