Table of Contents
Advertisement
3.1 Tools required
The following tools are required to install your transducer:
Item
Description
1
Power drill
2
13 mm (1/2 in) wrench or suitable adjustable wrench for anti-rotation nut
3
44 mm (1 3/4 in) wrench or suitable adjustable wrench for hull nut
4
Half-round file
5
Drill bit for pilot holes
6
9 mm (11/32 in) drill bit (for anti-rotation hole)
7
Marine-grade sealant
8
32 mm (1 1/4 in) hole cutter (for transducer stem)
9
Adhesive tape
Tools required for fairing block preparation
The tools below are required to identify hull dead rise angle and to cut the fairing block.
18
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
