Electricity; Checklist For Gas And Electricity - Rinnai FC510 Installation And Operation Manual

Electricity
WARNING
DO NOT use an extension cord or an adapter plug
with this appliance.
The heater must be electrically grounded in
accordance with local codes and ordinances or, in the
absence of local codes, in accordance with the
Na onal Electrical Code, ANSI/NFPA No. 70.
The heater is equipped with a three‐prong
(grounding) plug for your protec on against shock
hazard and should be plugged directly into a properly
grounded three‐prong receptacle. Do not cut or
remove the grounding terminal from this plug.
The heater requires 120 VAC, 60 Hz power from a
properly grounded circuit.
Plug the 6.5 foot (2 meter) long power cord into a
standard 3 prong 120 VAC, 60 Hz properly grounded
wall outlet.
8
Checklist for Gas and Electricity
□
A manual gas control valve is placed in the gas line
to the heater.
□
Check the gas lines and connec ons for leaks.
□
Confirm that the gas inlet pressure is within limits.
□
Confirm that the heater is rated for the gas type
supplied.
□
Confirm that the electricity is supplied from 120
VAC, 60 Hz power source and is in a properly
grounded circuit.
□
An extension cord or an adapter plug has not
been used with the heater.
Fan Convector Manual
Manual gas
shut‐off valve