Electromagnetic Compatibility - Siemens SINAMICS G120D Series Operating Instructions Manual

Technical data

11.9 Electromagnetic Compatibility

11.9 Electromagnetic Compatibility
The SINAMICS G120 drives have been tested in accordance with the EMC Product
Standard EN 61800-3:2004.
Details see declaration of conformity
Note
Install all drives in accordance with the manufacturer's guidelines and in accordance with
good EMC practices.
Use screened cable type CY. Maximal cable length is 15 m.
Table 11- 6
Category C2 - First Environment - Professional Use
Order number
6SL3525-0PE17-*A*0
6SL3525-0PE21-*A*0
6SL3525-0PE23-*A*0
6SL3525-0PE24-*A*0
6SL3525-0PE25-*A*0
6SL3525-0PE27-*A*0
EMC Emissions
Note
Install all drives in accordance with the manufacturer's guidelines and in accordance with
good EMC practices.
Use screened cable type CY. The maximal cable length is 15 m.
Do not exceed the default switching frequency 4 kHz.
290
Compliance Table
Remark
All inverters with integrated Class A filters.
The inverter meets the requirements for category C2 for conducted emis-
sions.
In a domestic environment this product may cause radio interference in
which case supplementary mitigation measures may be required.
Converter with control units CU240D-2
Operating Instructions, 04/2015, FW V4.7.3, A5E34262100B AB