HOW TO USE
Programmable Humidistat
Mist Temperature
Mist Output Level
Programmable Humidistat Setting
POWER ON/OFF BUTTON
Plug unit in to a 120 volt AC electrical outlet. Press the POWER
MIST OUTPUT LEVEL
Mist adjusts from the lowest output 1 to the highest output 5. To increase the mist output, press the
+ Button. The corresponding Mist Level will be lit on the display. To decrease mist output, press the –
Button.
MIST TEMPERATURE SETTING
To change the mist temperature from Cool to Warm Mist, press the Mist Temperature
will be illuminated on the display. To change the mist temperature from Warm to Cool Mist, press the Mist
Temperature
Button again. COOL will be illuminated on the display.
NOTE: Once Warm Mist is selected, it will take approximately 20 minutes to heat up before the mist
becomes warm.
Display shows:
Programmed Humidity Setting (pictured),
Timer Setting, Warm or Cool Mist
Selection, and Mist Output Level
Timer
Night Light / Display Light
Power ON/OFF Button
button to turn unit on.
7
Button. WARM